Full Sand and Recoat
When a wood floor is severely damaged or yellowed, or your customer simply wants to change the look of their floor, a full sanding and coating is the perfect solution.
Maintenance Coat
A maintenance coat is an excellent alternative to a full renovation, with a lower cost and less downtime.
Deep Clean and Refresh
A deep clean is an effective way of keeping floors beautiful, bringing dull wooden floors back to life in a jiffy.
Design Insights Unveiled
Answers to your design questions
Engineered floors typically have 3-4 mm of wear layer. Using Bona’s high-performance sanding machines, we ensure a gentle yet effective sanding process that removes old finishes while preserving the integrity of the wood. Once sanded, we apply one of our many finishes to enhance the floor’s longevity and appearance.
Bona sanding machines typically take away 0.7mm of wood during the sanding process. This means that an engineered floor with 3mm wear layer can be renovated 2 times, whereas solid wood floors with increased thickness can be renovated more than 2 times.
No. Our process is mostly dust free. While there could be some dust, our machines have dust containment systems that will take in most of the dust generated while sanding the floor.
No. All the products we use are GREENGUARD certified for indoor air quality and confirms to the latest European standards.
We may have to physically inspect the flooring before we can give an absolute answer to this question. However, we can safely say that we have rectified and renovated some very badly damaged flooring during the past years including some projects where the wood flooring is more than 400 years old. So, the answer is yes. But we need to inspect the flooring and will give you an estimate of how much percentage of perfection we can achieve after the renovation process.
Yes, we can. But the depth of brushing might differ. Our qualified technicians will inspect your flooring and give you a detailed briefing.
If the flooring board replacement is needed, the best option is to find the vendor who supplied you the flooring and ask for a few replacement pieces. Once the boards are replaced, we can renovate the flooring for you. If the replacement boards are not available, we will try our best to help you.
A brief description of each service has been given on our website. Once a site visit is conducted, we will be able to recommend the best service for you.
It depends on the type of surface and floor area. Deep Cleaning typically takes about 3 hours to complete. Whereas full sanding and recoating can take 5-6 days.
