When the top layer of a wooden floor’s protective surface is stained or has light scratches, a recoat will effectively restore its original beauty. The Bona Diamond Abrasives prepare the surface by removing scratches and wear. Then the perfectly smooth, sanded surface can be recoated with Bona Traffic HD, giving the floor a new layer of durable protection, with perfect adhesion to the layer beneath.
Step 1: Preparation
Remove all furniture from the area to be treated. Use a Bona Dusting Pad or a vacuum cleaner to remove dust and debris from the floor.Step 2: Deep Cleaning
Degrease and clean the surface thoroughly using the Bona PowerScrubber, with Bona Deep Clean solution diluted in the tank. Make sure that there's no excess liquid on the floor, and let it dry.Step 3: Fine Sanding
Abrade the surface with the Bona FlexiSand, using Bona Diamond Abrasives (grit 120 or 240). Attach the abrasives to a Quattro Disc, or a Multidisc with intermediate pads in between. Abrade corners and edges with a Bona SupraFlex. If the surface has any polish or wax on it, keep going until it's been removed. Vacuum-clean to remove loose sanding dust, or wipe it away with a Bona Dusting Pad.Step 4: Finish Application
Apply one coat of Bona Top Coat. Allow it to dry completely before allowing traffic to resume.Consultation Request:
Reach out to our team and express your interest in a Color Consultation.Initial Discussion:
A preliminary discussion to understand your goals, preferences, and any specific challenges you're facing with your space.On-Site or Virtual Consultation:
Depending on your location and preference, we offer on-site or virtual consultations to assess your space.Personalized Color Plan:
Our consultants develop a personalized color plan with detailed recommendations and visual representations.Follow-Up Support:
Continued support for any questions or additional guidance you may need during the implementation phase.Overcoating. Abrasion with Diamond Abrasives and overcoating with Traffic HD.
